Mentee Listing

Thank you for your interest in Engineers and Geoscientists British Columbia’s Mentoring Program. If you are a professional engineer (P.Eng.) or professional geoscientist (P.Geo.) that fits the description of any of the mentee seeking mentor requests below, please click on “Apply” and your request will be sent to an Engineers and Geoscientists BC staff member who will forward it to the appropriate person.

Mentoring Areas





Categories



Registration Mentee
Civil
Vancouver
Water/Sanitary
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor with knowledge in Inspections and Design in Capital Works. Also someone who can guide me how to get my license as soon as I can.


Both
Environmental
Vancouver
Impact Assessment
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I have a masters degree in Environmental Engineering from Concordia University and recently became a permanent resident in Canada. At the moment, I am actively seeking an opening for a Junior Environmental Engineer/Consultant job to start my Canadian Career ASAP. Therefore, I am looking for a mentor who could guide me to find the right source and connect me to companies in order to grow my network and increase my chance of meeting people to find a job.


Both
Fabrication
Surrey
Pressure Vessels
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor to guide me with design and manufacturing of engineering systems (including heavy/light fabrication, pressure piping, pressure vessels) in line with CSA, ASME and other International Standards. My background is in Bachelor of Mechanical Engineering with spl. in Welding Technology and Master in Machine Design. In terms of professional work experience, I have more than 17 years of increasingly decision making engineering experience while working for GE in Oil & Gas, Transportation, Aviation and Energy Division. 5+ years in the Welding Engineering for ISGEC heavy Pressure Vessels as per ASME Section I, III and VIII. I would like to have guidance to build on the top of my experience and continue my journey here in Canada.


Both
Electrical/Electronic
Vancouver
Instrumentation & Controls
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a mentor to guide me on how to become a professional Power Systems and controls engineers. I have been passionate about this field since my undergraduate. Although, I currently work as a Test Technician with Ballard Power Systems, I want to be able to transition to this field fulling my career dream.


Both
Mining
Vancouver
Exploration Geologist
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor to direct me down avenues to develop as a safety conscious and technically sound junior exploration/production/mining geologist. I completed my studies in South Africa (Bsc. Geology (honours)). I have done Co-op work with Glencore at the Mopani Mine, Zambia, and also nearly got accepted into their graduate development program. Since then I have moved back to Canada in the hopes that the mining industry here is more active. I would greatly appreciate an emotionally mature mentor who can make sense of the lows that we all (presumably) experience during this time in our early career and give some helpful, honest advice to a young, passionate geo trying to find his way. I do not expect my mentor to be available 24/7, that would be unfair.


General/Career Mentee
Research and Development
Burnaby
EIT
Career Counselling, Entrepreneurship, General Mentoring
There is definitely an immense opportunity to learn from many mentors but I hope to find a mentor who can provide guidance about, - starting a career in Canada in the clean energy/cleantech space - help me connect the dots between my education and experience to be able to identify relevant opportunities I can contribute effectively - what to know before starting on an entrepreneurial venture - the best practices in the professional world


Both
Research and Development
Coquitlam
Automation,Robotics
Applicant
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a Mentor who could give me an insight on how to apply my education and experience in Mechanical Design Engineering to advanced up-to-date technologies, such as Robotics, Alternative Energy Sources. My undergraduate education is versatile and applicable to any kind of manufacturing, my Master's course highlight was integration of Informational Technologies and Manufacturing. My current work experience was mostly design of technological tooling, and now I am trying to find a chance to apply my skills to developing technologies of the future. I have submitted all required documents for my E.I.T. application and hoping to be approved soon.


General/Career Mentee
Design/Build
Vancouver
Bldg Construction/Maintenance
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor to guide me with current industry practices. Also, I would like to get advice on getting a right and suitable opportunity and how to succeed as an engineer. I am graduated with MEng in Civil Engineering from the University of Calgary and completed courses such as Advanced Project Management, Project Planning and Control, Structural Design and Prestressed Bridge Design, etc.


Both
High Technology Manufacturing
Abbotsford
Automotive
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a Mentor to guide me with necessary tools(methods) that I can use to determine reliability metrics of complex mechanical/hydraulic systems. I am working for a company that makes specialty hydro-mechanical transmissions for large vehicles. I would like to have some guidance from someone with a background and experience in high tech/automotive/industrial reliability engineering.


Both
Chemical
Outside of BC
Process Design and Control
EIT
Career Counselling, General Mentoring
I am looking for a mentor to help in the early stages of my career including job searching techniques, type of industry to enter, and a sense of realistic career expectations. I have degree in Chemical Engineering with coop experience as a Project Coordinator at CIBC, two terms of Research Associate experience in Chemical Engineering (surface chemistry), and a term of Research Associate experience in Biomedical Engineering (ophthalmic & tissue).


General/Career Mentee
Electric and Gas Utilities (incl. BC Hydro)
Burnaby
Power Generation/Distribution
P.Eng., 10 years
Career Counselling, General Mentoring
I'm looking for a mentor to help define career goals, different perspective on career paths, work/life balance advice and/or technical advice in the field of electrical and/or protection and control engineering.


Both
Environmental
Burnaby
Wastewater Treatment/Mngt
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking to obtain insights from a mentor on what I can improve to help me become an engineer. I worked for a prefabrication company in BC as a drafting technician for about two years, which honestly has little to do with the knowledge I learned from environmental engineering in university. My goal is still becoming a professional engineer. However as an international student, sometimes I feel lost and don't know what to do. Therefore I am hoping to be connected with an experienced engineer, and with his/her guidance, I can establish the next move for my career. I am certain any feedback will help me greatly in my development.


General/Career Mentee
Instrumentation/Controls
Outside of BC
EIT
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor to guide me with Industrial Systems integration, Information Technology and Operations technology convergence and Industrial Cyber security. I would like to have a mentor with Industrial automation experience in SCADA systems and secure scada architecture design, infrastructure as well as Cyber Security., who could help shape my career on this field with valuable inputs and directions and knowledge transfer. I have a background in Electrical Engineering (M.Sc) from University of Colorado Denver, USA. I am working as a Controls Engineer in New Jersey, USA, planning to move to British Columbia, Canada in 2020-2021. I would like to learn the industry trends in Canada, standards, ethics and best practices.


Both
Civil
Richmond
Water/Sanitary
EIT
Engineers and Geoscientists BC Registration Process, General Mentoring
I'm an EIT motivated to succeed and looking to connect with a mentor who is willing share a valuable insight on how to prepare for the experience reporting on the application for P.Eng. Through advise in career experience and lessons. I also would like to connect to a mentor who has experience in Storm, Sanitary and Water design principles. Thank you and I am looking forward for a positive mentoring experience.


General/Career Mentee
Mechanical
100 Mile House
Building Systems
EIT
Career Counselling, Entrepreneurship
I'm looking for a mentor that can guide me from the position I am right now, which is an EIT who needs to work a minimum of six months under the supervision of a P.Eng. in order to attain P.Eng. designation, to a fully functional consultant capable of designing complete Fire protection, plumbing and HVAC systems for commercial, industrial and residential buildings. My current level of expertise is as follows: I have already designed complete projects on my own outside Canada (Mexico). In Canada, I have been working in this industry for over three years, not as an Engineer, but as a tradesman, I'm a red seal certified plumber.


General/Career Mentee
Prince George
Municipal/Urban/Town Planning
P.Eng., 1.5 years
Career Counselling, Entrepreneurship, General Mentoring
My office in Prince George is small and I don't currently have anyone that I admire or look up to. I am seeking someone to help me move forward with my career and who I can contact to gain a second opinion on various scenarios .


Both
Computer
Vancouver
Software
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a Mentor to give me some matured perspectives for which career path I should pursue. ?My background is in Computer Science and Mechanical Engineering. ??I am currently working for A&K Robotics company in Vancouver. I started off as a robot assembler and stepped up to be a robotics engineer, however, with the business expands I took more responsibilities in the customer success section in the company. ??I would like to have some guidance from someone with a background and experience in computer science and consulting to answer some of my career planning questions and receive some general mentoring. ??Thank you very much for your careful considerations.


Both
Structural
Vancouver
Towers
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am a recent graduate Civil Engineering student specialized in Structural Engineering. Due to the reason that I am still seeking a work opportunity, I need help from the mentor for a clear guide on getting a job offer (like how to get employment resources related to my major, write a competitive cover letter/resume). Besides, I want to enhance professional knowledge in structural design and expand my networking. After getting employed, I need guide from the mentor for professional growth.


Both
High Technology Manufacturing
Victoria
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am and EIT looking for a mentor to help guide me through accumulating experience and developing my competencies to achieve my P.Eng. I am based in Victoria, BC but I am working remotely for an American medical company, Omnicell, and currently do not work under any Canadian professional engineers. I am a recent graduate in B.Eng Biomedical Engineering from UVic. I have been working for Omnicell for approximately a year since my graduation from the program.


Both
Construction
Abbotsford
Roads,Rails,Airports
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a Mentor to guide me gain more knowledge about project management and drafting (AutoCad, S-Frame, etc) skills. My background is Civil Engineer. During my educational career, I did my internship with CANAR construction in Kuwait on a Highway bridge project (930 Million USD). After graduating in 2017, I was employed with the Department of Transportation and Infrastructure Renewal with the Government of Nova Scotia and I'm currently working as a Project Engineer with PNR Railworks. Most of my duties include Quality inspection of the work done, auditing the work in accordance to the design specifications and the contract scope and some administrative coordination. I would like to have some guidance on how to develop my engineering and management skills from someone with a background and experience in construction management and design of bridges, buildings, roads, or railways. Linkedin: https://www.linkedin.com/in/firas-fares-freja-31707275/


Registration Mentee
Design/Build
Richmond
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am a young EIT in mechanical engineering with 2 years of work experience (coop + full time). I have worked for 4 different companies in different roles since now but haven’t found a direction for my career yet. My previous job provided me chances to gain experience from product development, manufacturing, project management and mechanical design, which makes my current situation is that I understand a little bit of everything but not professional for anything. I would like to have someone who is knowledgeable about the industry to guide me to found out where should I go for my professional career based on my current experience.


Both
Power (Energy)
Kelowna
Instrumentation/Equipment
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a mentor for professional development. I would like to learn critical thinking. I would like to learn how to determine building codes and safety standards based on engineering specifications. I would like to get some knowledge of project management. I would also like to learn Smart plant 3D and Primavera P6 software for project management. I am opened to accept challanges and I would like to welcome learn a new competency to advance my career. Sincerely, Rana, Shivang


Both
Civil
Vancouver
Bldg Construction/Maintenance
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a Mentor who can help me combine being a P. Eng with a little entrepreneurial spirit. My background is in Civil Engineering, but I have had a taste of entrepreneurship through summer work opportunities and it is a nice change of pace. That being said someone who will be able to help with design calculations and how to approach meetings with potential clients or interviews will be extremely valued.


Both
Power (Energy)
Vancouver
Power Generation/Distribution
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor to guide me on how I can best work on entering the job market here in a field related to the electrical power system. I have a background in Power Systems and was employed at Energinet in Denmark as a Power Systems Engineer, where I worked with modelling and simulation issues. I mainly worked with models of thermal power stations, where I prepared and verified models and reviewed grid code compliance studies. I would like to some guidance from someone with a background in electrical engineering related to electrical power systems.


Both
Structural
Surrey
EIT
Engineers and Geoscientists BC Registration Process, General Mentoring
Currently, I am working with Reliance Engineering Inc. I have 10 years of Canadian experience in the structural design of residential buildings (light Frame Construction). I performed excavation, foundation and framing inspections. I am looking for a mentor who can guide me in writing experience competencies as well as the path to become P.eng.


Both
Mechanical
Vancouver
HVAC
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a mentor who will guide me to a specialization in a Discipline that is related to Mechanical Engineering in the Construction or Power industry. I have a Masters in Mechanical Engineering and have been working for 2 years with a private construction company called 'CadMakers'. My work involves 3rd party review of Building construction documents that are in Issue for Construction (IFC) stage for Concrete, Wood Framing and Mass TImber projects by using CATIA V6 (3D Experience software designed by Dassault Systems). Designing of Mass Timber components, Facade Components, QTOs, Site Install Drawings, Coordinating and finding solutions to RFIs with clients.


Both
Structural
Vancouver
Bldg Design/Const - Wood
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am a granted EIT with EGBC, I am looking for a mentor who can guide me through the recent practices in local structural engineering and its requirements. I would welcome a mentor who could share his/her experience with me, that help me to update my knowledge and skills to be matched with the Canadian Building Coeds and Standards


Both
Electrical/Electronic
Vancouver
Power Generation/Distribution
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor preferably with experience as an electrical engineer in power systems or in detailed projects for industrial plants, which would be willing to mentor a newcomer to Canada. Someone with the desire to making connections and share the best practices for working as an electrical engineer in BC. I have experience in the utilities (energy distribution) and in the oil and gas industry. I have experience developing multidisciplinary detailed projects and electrical studies. I would also appreciate the willing to help with the enrollment with EGBC, especially with the competence assessment process.


General/Career Mentee
Mining
Cranbrook
Mine Tailings
P.Eng., 1 years
Career Counselling, General Mentoring
I'm looking for a mentor to help me to build confidence in myself in the workplace, and to help me work through certain challenges I face in a male dominated industry. I would like to receive guidance on my career path forward, and better learn how to promote myself.


Both
Structural
North Vancouver
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
Hello, I am a structural designer with a Master's degree in structural engineering and overseas experiences in structural engineering and construction. I am seeking a mentor who has a broad knowledge of different fields of structural engineering and is highly skilled in one of them. A person who has been working in this industry in Vancouver and is updated and familiar with local structural engineering and its requirements. I would like my mentor to help me decide what area I should choose to become highly skilled in, by taking the right education. I would like my mentor to know the current popular structural software. Ideally, my mentor can also help me with my P.Eng application. Thank you.


Both
Construction
70 Mile House
Bldg Construction/Maintenance
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship
I am looking for a mentor to guide me which civil works i can handle it. My background Civil and mechanical engineering. However l am more comfortable with civil engineering. i am looking job similar construction management. l have some experience either from Canada and Turkey.


General/Career Mentee
Vancouver
Process Design and Control
EIT
Career Counselling, General Mentoring
I am looking for a Mentor to guide me with career development and share a wealth of wisdom and insight. I am an international graduate with a major in Chemical Engineering. I started off my career as Project Engineering for one of EPC contractors in Korea for two-year. I was away from the field related to my major for three years to get my PR card in Canada. I want to back into the engineering field and become a Process engineer. I'm willing to work on a voluntary basis to gain experience and go back to school to do masters in Canada. I would like to have some guidance from someone with a background and experience in chemical process engineering.


Registration Mentee
High Tech - Others
Vancouver
Information systems
EIT
Engineers and Geoscientists BC Registration Process
I graduate from Mechanical Engineering back in 1997 and has been working in the IT industry for quite some time. My manager I reported to back in 2010 was a P. Eng and I started with my E.I.T. process. Due to different environmental changes, I lost my P. Eng supervisor and my experience logging has stopped. My career in IT continues, however, I would like to pursue my P. Eng designation while I practice on my day to day job. My current role is a Senior Information Systems Security Analyst at one of the BC health regulator: BC College of Nursing Professionals. Prior to my current role, I hold the Information Security Engineer position at Coast Capital Savings.


Both
Food/Beverage
Outside of BC
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a Mentor to help me identify gaps in my profile and improve my skillsets. My background is in Food/Bioresource Engineering. I am employed in the dairy sector. I started as a quality control lead and eventually, promoted to monitor and optimize CIP systems. Alongside, I manage a small team of workers, and a few system improvement projects. I am constantly looking for opportunities to quench my endless thirst for learning. I would like to have some guidance from someone with a background and experience in sustainable engineering projects. Also, I would like some guidance in designing pumps, and steps involved in designing industrial equipments.


Both
Environmental
Vancouver
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a Mentor to guide me in business development and effective work practices tips in the environmental sector. My background is in Mechanical Engineering. I’ve been employed in the environmental sector for two years working with manufacturing, oil & gas, renewable energy, energy efficiency, agriculture, offset projects, transportation and regulatory work. I’ve been working for Brighstpot Climate. Prior to that I worked for PwC within their internal consulting team that would help the organization implement new processes and technologies. I then moved to Vancouver and began working for Brighstpot Climate, learning the ropes on environmental regulation and offset projects.


Both
Design/Build
Vancouver
HVAC
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling
I’m currently a test engineer conducting various experiments on energy recovery systems and provide feedback to both production team and customers. I have been doing this work for the past four years and have learned a lot, but I don’t feel I’m learning much new things these days. I would like to get a better perspective on how the future look like in my field and what skills I need to learn to be successful in my career. My goal is to be directing team of engineers in a product development or research environment.


Both
Mechanical
North Vancouver
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a mentor who will help and advise me throughout the beginning of my career as a mechanical engineer. My strengths are machine design, 3D modelling/CAD, fluids and thermodynamics but I have a keen interest in moving into the energy industry. I am currently working in the shipbuilding industry but have prior experience in mining and heavy manufacturing. I am also interested in project and business management as well. My mentor will ideally come from a background in either energy systems, environmental engineering, industrial engineering or mining. I graduated from the University of Victoria but also hold a mechanical engineering technologist diploma from the Northern Alberta Institute of Technology.


Both
Electrical/Electronic
Richmond
Instrumentation/Equipment
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I'm looking for a Mentor to guide me with instrumentation engineering and project management tips. I am an internationally-educated instrumentation & control engineer and project management engineer with 14 years relevant work experience in electrical power field. I have completed my bachelor’s degree in Control Engineering in June 2004 and my master’s degree in MBA in June 2015. After that, I have worked at a laboratory in an energy and utility company in China responsible for installation, calibration and commissioning various instrumentation. Moreover, I worked in an electrical power engineering company responsible for management contracts and scheduled project.


Registration Mentee
Mechanical
Vancouver
EIT
Engineers and Geoscientists BC Registration Process
I am looking for a Mentor who help assist me in better understanding pressure vessel and piping systems. I am currently working in a medium-large fabrication shop and my opportunities for supervised engineering work are intermittent. I would like a Mentor to help assist me in sample set of calculations and provide feedback in order to increase my engineering knowledge and assist with my application for registration.


Both
Civil
Port Moody
Municipal/Urban/Town Planning
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am a registered EIT with EGBC. also I am working on my PEng application. I had more than 10 years experience as civil and process engineer in consulting engineering companies back home and I have been working as a Civil Designer in Canada for more than 2 years. I would like to have some guidance from an experienced engineer about my career path and the competencies which I have to complete as part of PEng process. I would like someone help me to get a better understanding that what area I need to develop to take my career to the next level.


General/Career Mentee
Chemical
Vancouver
Process Design and Control
EIT
Career Counselling, Retirement and Succession Planning, General Mentoring
I am looking for a mentor with experience working on process design, process control, or process safety in developing processes. Currently, I am working as a laboratory technician at Bureau Veritas since July 2019. I have graduated in Nov 2019 from the chemical engineering program of Lakehead University and I am actively looking for a career change. I am looking for guidance on the following: Career change and planning Certification and professional memberships other than EGBC Industry practices


General/Career Mentee
Structural
Vancouver
Bldg Design/Const - Wood
P.Eng., 1 years
Career Counselling
I am looking for a mentor who can guide me about the paths/courses to take to get into Structural engineering and would highly appreciate if he/she could provide guidance about basic principals and calculations alongwith procedures in the field of structural engineering.


Both
Structural
Vancouver
Bridges
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor who is open to share his/her experience with me; ideally someone who has worked in different business sectors that can help me to get a better perspective of the job market and different structural engineering expertise.


Both
Chemical
Vancouver
Process Design and Control
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor knowledgeable in the professional registration process and willing to share career and technical advice. I'd like my mentor to have experience in the following: - Chemical plant design, developing P&IDs - Equipment Selection (pumps, valves, instruments) - Process Automation & Control - Project Management


Both
Transportation
Kamloops
Transportation
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a Mentor to guide me in Civil Schedule of Quantities and Unit Price calculations, Civil Infrastructure Design, Transportation Studies such as Traffic Impact Assessment, new Development Project considerations and Municipal Construction Inspections and some guideline in miscellaneous questions.


General/Career Mentee
Vancouver
Other
P.Eng.
Career Counselling, Entrepreneurship
I am looking for a mentor who is a seasoned professional in the Engineering industry (preferably energy sector). I consider that I am approaching a career crossroad and would like some advice/perspective from an experienced Engineer. I am considering starting a new company and would like any entrepreneurial advice on offer also.


General/Career Mentee
Electrical/Electronic
Vancouver
Controls/Robotics
EIT
Career Counselling, General Mentoring
I am looking for a mentor who struggled to get his first job and knows what helped him overcome the challenge. I also want a mentor who knows what are the keys for success in consulting engineering industries.


General/Career Mentee
Mining
Outside of BC
Mine Evaluation
P.Eng.
Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
Career growth and learning from the mentors on the right ways to approach my future goals. My background is Environmental Engineering with focus on overall mine water management and associated impacts, closure strategy, and mergers and acquisition evaluations for mining clients.


Both
Product Development
Vancouver
Systems/System Integration
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Retirement and Succession Planning, General Mentoring
I am a recent graduate, and am now working as a Junior Firmware engineer with Sierra Wireless. I am looking for a female mentor to guide me in dealing with issues such as imposter syndrome, managing lifelong learning to stay on top of constantly advancing technology, work/life balance, and general career counseling. I would prefer someone who works in the Computer software/firmware/networking field. Thank you.


Registration Mentee
Heavy Manufacturing
Burnaby
Machine,Plant Design
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a mentor that has extensive experience in design and technical analysis. My background is in Mechanical Engineering. The first company I worked with focused on fabrication and major maintenance projects in the oil and gas industry in Malaysia. As such, I have experience in project management, cost controls, piping fabrication and asset integrity. My first role in Canada was as a CAD technician, working on designs of wear solutions and 3D modelling. My current role is on the other end of that in sales. I find that I enjoy working in design very much and would like to know what options there are as a design engineer further along in my career.


Both
Mining
New Westminster
Mining Operation
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor who can guide me through the mining and metals industry and help me meet other people in the industry. Mining is very tight knit and difficult to break into, so it is challenging to learn more about different working environments and types of engineering. It would also be beneficial to learn more about the cyclical nature of mining.


Registration Mentee
Chemical
Vancouver
Process Design and Control
EIT
Career Counselling
I am a chemical engineer with a background primarily in operations within several industries including mining, oil and gas and clean technology as a result of co-op and my current employment. I am looking for advice and strategies on how I can transition my career into consulting. I would also like guidance and insights from anyone who has written their GMAT and continued their education to obtain an MBA or other graduate business degrees as that is something, I am considering but would like to hear about other experiences.


Both
Hydrogeology
Richmond
Environmental Geochemist
GIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Retirement and Succession Planning, General Mentoring
I'm a GIT specialized in Hydrogeology with an academic background in geochemistry. I'm looking for a mentor working in the environmental monitoring and remediation industry who would like to guild me to pursue my career path to a professional geoscientist. I would like to learn the industry experience on contamination site remediation, mining, PSI, etc. I'm currently working in a consulting company in Richmond, BC.


Both
Structural
Vancouver
Bldg Design/Const - Concrete
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
My background is in Civil Engineering. I am a recent graduate with a master's degree in structural engineering and a bachelor's degree in civil engineering from UBC. And currently, I am still searching for any positions relative to civil engineering. I am looking for a Mentor who can give me some suggestions or guidance on career development and general mentoring. I would like to be given and kind advice or comments from an experienced mentor with a background in structural engineering. I appreciate any of your time and assistance.


Both
Mining
Vancouver
Extraction/Processing
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a mentor who would help support a career shift into the resource and mining industry. I am currently working in the building systems industry as a mechanical engineer-in-training and have been doing so for about one and a half years. I've always had a strong interest in mining and would like to be paired with someone who can help develop a supporting mentoring relationship.


General/Career Mentee
Communication & Telecommunication
Fraser Lake
EIT
Career Counselling, Entrepreneurship, General Mentoring
As I'm a newly landed immigrant, I am looking for a career mentor who can help me building my professional network. Also, I would expect some information on potential employers. I expect to improve my soft skills in the context of Canadian workplace. Finally, I would love to know some self-marketing strategies.


Both
Environmental
North Vancouver
Environmental Impacts
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring, Entrepreneurship
I am looking for someone knowledgeable about the environmental engineering field, particularly within the environmental consulting industry. I am willing to do volunteer work to gain experience, with no expectations of pay or employment at any point. The projects could be fictional, I am just looking to learn about the field! I would then use this experience in my job search and eventual job. After my employment to a third party, I would treasure a guide and mentor in becoming a successful PMP and PEng, with some technical guidance as appropriate.


General/Career Mentee
Geology
Vancouver
Economic Geology
Applicant
Career Counselling, General Mentoring
I am looking for a Mentor to guide me on how to incorporate data science with my geology and GIS skill set. I am hoping to gain employment in Economic Geology, but am interested in all facets of geology. My background is in Surficial Exploration Geology and GIS, with work experience at Sil Industrial Minerals as an Exploration Coordinator. I have a year and 4 months work experience as a Geologist, with two years of experience teaching English abroad in South Korea.


Both
Mining
Vancouver
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
Someone who works in the mineral processing industry for several years and has been through the job searching and job development. Also he/she has PEng so be able to help me through the application process.


Both
Provincial/Territorial
Victoria
Processes/Production
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a Mentor who can guide me through the PEng application process and provide general career development advice. I have worked in several different areas over the past few years, some without a PEng supervisor, so would appreciate someone who could help me navigate the guidelines with this multi-faceted background. I am currently working in provincial government and would also like to discuss this career path or careers in the renewable energy/climate change space.


Both
Construction
Burnaby
Roads,Rails,Airports
Applicant
Engineers and Geoscientists BC Registration Process, General Mentoring
I am looking for a Mentor to help me in the process of registration and how to pass the seminar as I have experience in construction projects including Roads, sewage, landscape, and water supply


Both
Design/Build
Coquitlam
EIT
Career Counselling, General Mentoring
I am looking for someone with the experience and a translatable engineering approach that works. I am also looking for someone with great social skills who knows how to take initiative at the right time to guide their career path in the direction that suits their needs and abilities. I am 26 y/o male, graduated from mech. eng. 2015 in perth. I am very open minded and driven and really look forward to meeting an industry professional.


Both
Const and Manufact - Other
Coquitlam
Production Systems
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a mentor who can guide me through the recent practices in industrial engineering/ manufacturing/ operations and major electrical engineering projects. I look for a mentor who will be my career coach and can guide me choosing the right path/ decisions. My mentor should be able to teach/ guide/ enlightens me about the best practices/ innovations/ most effective ways to deal a certain projects/ scenarios.


Both
Design/Build
Burnaby
Pipelines
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor who is experienced with pressure piping design and project management. I am currently working as an EIT with CANNEPP and carry out a mix duties including pressure piping design, quoting, and project management. I want to be able to set goals to help me stay on track to attaining my P. Eng and structure my future career goals.


General/Career Mentee
Product Development
Vancouver
Electronics/Microelectronics
EIT
Career Counselling, Entrepreneurship, General Mentoring
I'm looking for a Mentor with experience working with embedded systems or software in both startup and corporate environments at a senior level. I am currently 4 months into my first job after graduation. I design and develop hardware and firmware for IoT products at a startup in its very early stages. Im looking for guidance on the following: - Career planning and life long learning. - Growing and maintaining a professional network. - Employer/employee relationships. - Personal branding. - Technical expertise and industry best practices.


Both
Civil
North Vancouver
Bldg Construction/Maintenance
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a Mentor to guide me on project design, project estimation, and concrete design, and project supervision. I am a civil engineer with more than 15 years experience in supervising, implementing, designing of water supply projects, and managing construction projects. I would appreciate anyone who can help me to update my knowledge and skills to be match with the Canadian Building Coeds and Standards.


Both
Design/Build
Vancouver
Power Equip/Electronics
Applicant
Engineers and Geoscientists BC Registration Process, General Mentoring
I'm looking for a highly skilled mentor in the field of electric machines. I've been working in the field of control for electric machines for the past 12 years, and looking to enhance and develop unique motion systems.


Registration Mentee
Construction
Richmond
Municipal/Urban/Town Planning
EIT
Engineers and Geoscientists BC Registration Process
I am looking for a mentor who can help with gaining design experience required to get my PEng. I hope mentor can also provide guidance on career path.


Both
Burnaby
Advanced Materials & Polymers
EIT
Career Counselling, Entrepreneurship, Engineers and Geoscientists BC Registration Process, General Mentoring
I am looking for a mentor to guide me with the general tips of earning one year Canadian engineering experience related to environmental or chemical industry. My background is chemical engineering. I have worked in a university as researcher for more than 10 years, specializing in lignin separation and supercritical fluid extraction. Currently, I am working in environmental lab as analyst. I would like to have some guidance from someone with a background and experience in either chemical process or environmental engineering.


Both
Chemical
Vancouver
Process Design and Control
EIT
Career Counselling, General Mentoring
I am looking for a mentor that will help me expand my network, and guide me by making suggestions to which courses I could take to help me achieve my goals. Although I graduated in chemical process engineering, I have also considered mining, mechanical, manufacturing, and civil engineering. I need someone that will hone my focus of my profession, and offer advice on the best way to achieve that goal.


General/Career Mentee
Hydrogeology
Kelowna
Soils/Groundwater Mngt
P.Geo.
Career Counselling, General Mentoring
I am currently in the early stages of my career as a hydrogeologist and would like advice on possible career paths. At the moment, I have some ideas about possible career paths but would like to better understand the pros and cons of each option from someone with in depth experience in the industry.


Both
Mineral Exploration
Vancouver
Economic Geology
GIT
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor that would help develop my career. Provide guidance, advice and exposure to multiple disciplines and industries. I need a mentor that is willing to guide and support a motivated mentee that is relatively new to the industry and environment. I am a recent graduate and my interests are in economic geology, resource geology and exploration geology.


Both
Chemical
Burnaby
Process Design and Control
EIT
Career Counselling, General Mentoring
I am looking for a mentor to help me fulfill my passion for chemical process development where I can utilize my heat and mass transfer knowledge to design operation units (heat exchangers, distillation towers, reformers, etc). However I would like to stay in clean or environmental technology as reducing greenhouse gases and creating sustainability is my aspiration. Currently, I'm working in the fuel cell industry, and the majority of my company are mechanical engineers. I'm currently involved in mechanical process development and material testing, which is not really my career interest. I don't want to further develop in the area where doesn't align my passion and my skill-set. However, I don't have any past experience in chemical process development other than from school, which makes it hard for me to find a job in chemical processing, especially in clean energy. What should I do?


General/Career Mentee
Land Development
Surrey
Water/Sanitary
EIT
Career Counselling
My background is in civil engineering. I have around one year work experience in land development area. I upgraded myself by taking a civil 3D certificate course. However, I am finding difficulty to find a suitable job. i am expecting from my mentor some guidelines about how to improve my skills and how to get a job.


General/Career Mentee
Environmental
New Westminster
Environmental Training
EIT
Career Counselling, General Mentoring
I am looking for a Mentor to guide me through existing fields of Environmental Engineering or Environmental Science that are in demand in Greater Vancouver. Graduated with Master's Degree in Biotechnical Systems and Technologies in Russia, I have recently received EIT status in BC and dedicated to become involved into Environmental field of work in Greater Vancouver. I have work experience in Environmental Monitoring and Control from Russia and volunteer experience in Wetland Management from Alberta. Through mentoring program I hope to get career advising and develop a clear career plan.


Both
Project Management
North Vancouver
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
Please I am looking for a Mentor who can help me with my P.Eng Registration with EGBC, and support me to improve my skills and knowledge regarding Construction Engineering and Management practices. I have MS in Construction Engineering & Management, MBA, and 15+ experience in civil engineering and project management. I have 9 months Canadian experience working as Assistant Site Supervisor, Project Coordinator, and Safety Officer with Fraser River Construction Company (Surrey, Delta, and Vancouver). I have successfully passed (5 months) Public Works Training Program with 98% led by PICS, ASTTBC, KPU, and City of Burnaby, and awarded KPU ROA and RPWT (P) with ASSTBC.


General/Career Mentee
Mining
Vancouver
Mine Evaluation
EIT
Career Counselling, Retirement and Succession Planning, General Mentoring
I am a mining professional with over nine years of experience. My areas of expertise are mine planning, project evaluation and feasibility studies. In 2017, I moved to Canada, and one year later, I received my master’s degree at the University of British Columbia. Currently, I am looking for a mentor who can share his/her experience in the mining industry, someone who understands the mining world and its challenges. I believe that with the exchange of experience/knowledge, I will be capable of making better decisions regarding my career. On the other hand, I will be happy to share my work experience in countries like Peru, Bolivia, Mexico and Spain.


Both
Project Management
Vancouver
Other
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship
I am looking for a mentor to help guide me through the application process to become a P.Eng and someone to discuss career goals with. I am interested in finding someone who has experience working in consulting / project management as that is currently where my experiences lies. Ideally, someone who is entrepreneurial and someone who has worked in multiple sectors would be nice too as I do not currently work under a P.Eng and would like advice on that.


Registration Mentee
Const and Manufact - Other
Chilliwack
Services: Lighting,Bldgs,Roadway
EIT
Engineers and Geoscientists BC Registration Process
I am currently working with KONE Inc. as a training specialist / Tech Support and also Installation development specialist. I do some of the engineering works, code related and design related but most of my work has been in US. and some of it in Canada. I would like the guidance of my Mentor to understand what part of my work makes me eligible to have the 1 year experience in relevant field and the step forward


Both
Geological
Vancouver
Software
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I would like my mentor to be involved in developing software applications and data science projects particularly related to rock mechanics (mining, tunnelling, etc). I am interested to update my mentor about the projects I would like to work on and get her/his feedback on the workflows and reiterate the process with developing myself.


General/Career Mentee
Project Management
Vancouver
Bldg Design/Const - Wood
P.Eng.
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor for support with improving my structural design competency, with a focus on wood and concrete structures. I would also benefit on a mentor open to discussing and guiding me through career development in the areas of project management and seismic design/retrofit, and emergency response. I've been working in an engineering consultancy firm for the past 3 years, where I do structural design and project management, often with First Nation Communities. Prior to this I completed a MASc at UBC in 'Coastal Communities' Resilience to Earthquakes', assessing available infrastructure, personal and resources. I would like to have guidance from someone with a background in civil or structures, with possibly a focus on seismic design/emergency preparedness and response.


Both
Water Resources
Vancouver
Water Resources
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am in search of a mentor that will guide me through the P.Eng registration process and at the same time will help me with career orientation. I have a Civil Engineering background, and I have been working in the Water Resources sector for the past two years. I am seeking guidance from an engineer with a background and experience in my field or similar.


Both
Construction
Vancouver
Pipelines
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
A professional Engineer working in the construction industries, general contractor side. Experience with project management and construction. Familiar with P.Eng application process based on project management and construction related experience.


General/Career Mentee
Vancouver
P.Eng.
Career Counselling, Entrepreneurship, General Mentoring
I'm looking for someone who has experience in high tech/ R&D, civil infrastructure and entrepreneurship. Most importantly, I'm looking for someone who shares my passion for innovation and applying the most prominent technology in the field of civil infrastrucutre design /planning.


Registration Mentee
Construction
Fort St. John
Hydroelectricity/Dams
EIT
Engineers and Geoscientists BC Registration Process
My background is Civil Engineering. I have been employed in the Civil Construction sector for over two years. Currently, I work for BC Hydro as a Field Engineer (EIT) on the Site C Clean Energy Project. I am looking for a mentor to assist me with EGBC’s registration process (EGBC Competency Experience Reporting System and work experience).


Both
Vancouver
Roads,Rails,Airports
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a mentor to guide me with my P.Eng application while supporting me with general career development. I am currently pursuing my master's degree in transportation engineering and planning while working full-time at a consulting firm in Vancouver. I'm hoping to hear advise moving forward, as I attain designations and how to maximize learning / growth at this early stage of my career.


Registration Mentee
Electrical/Electronic
Vancouver
Electronics/Microelectronics
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a Mentor to guide me towards FPGA/ASIC development projects. I have a dual Masters degree (Thesis based) from UBC and Erasmus Mundus EU funded program.


Both
Vancouver
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling
I would like to talk to a mentor who has an extensive knowledge and experience on medium and high voltage electrical network and equipment. I would like to talk about maintenance procedures and standards which are being complied in electrical utilities and other companies. I also want to talk about the electrical protection devices and equipment. My ideal mentor can coach me in long-term career growth and development.


Both
Electrical/Electronic
Vancouver
Services: Lighting,Bldgs,Roadway
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor that could provide guidance and suggestions on job search and interview techniques. I am a new graduate from UBC Electrical Engineering and has been struggling to find a full time job. I am interested in consulting engineering and applications engineering, where the positions is more client facing and able to communicate directly with clients for solving their issues. I am looking for a mentor that can give me advice on what employers are looking for in a candidate and be able to prepare myself in the best way possible. Also for the fields I am interested in, I would like to learn more about how a career in those fields look like.


Both
Project Management
Vancouver
Bldg Design/Const - Concrete
EIT
Career Counselling, General Mentoring
I am looking for a mentor with project management experience or engineering or management consulting background. My mentor can guide me in developing plans and strategies to help my career development in project management or consulting. Mt mentor can offer guidance on how to deal with day to day challenges at work. I am an EIT working at a structural engineering firm in a project management role. My university degree was in petroleum engineering. There is a technical knowledge gap that I don’t have in structural engineering. I have enrolled in structural engineering courses with SEABC. My role exposes me to technical experience in structural engineering. My primary focus in project management then structural engineering technical knowledge. My goal is to get PMP designation in a year and P.Eng. designation in 3 years.


Both
Civil
Burnaby
Water Resources
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I need a civil or structural engineer to help my in my career and getting my P. ENG. and someone whose an geomatic or remote sensing engineer.


General/Career Mentee
Mining
Vancouver
P.Geo., 3 years
Career Counselling, Entrepreneurship, General Mentoring
Hi, I am looking for a mentor to guide me through the ever-changing exploration geology field. I have a specific interest in economic geology, exploration geology, Quaternary geology, resource geology and project management. My background is in exploration geology and I have been employed in academic geology (GSC), junior exploration geology (Sabina Gold & Silver) and with a senior producer (Goldcorp). I am currently employed in the mining AI field (Minerva Intelligence). I started off being a junior geologist focused on core logging and drill management (Sabina) progressed to simple geological modeling (Sabina) then I moved over to Goldcorp. At Goldcorp (Red Lake) I got exposure to a wide range of jobs and projects from 3D modeling, planning drillholes, running drill programs, running entire multi-million dollar projects (HG Young), hiring staff, mentoring geologists, budgeting, resource geology etc. I gained knowledge in the entire mining process (Geo-Mine-Met). I recently moved into the mining AI field. I would like to have some guidance from someone who has lots of multi-disciplinary experience to help me navigate my career in the geology/mining field (as there are so many options out there!).


Both
Instrumentation/Controls
Burnaby
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor to guide me with: 1. Tips on fastest way to understand a complex machine/ processes. 2. Best way (step by step) on developing PLC program (bypass, forces, UDT, interlocks). 3. Managing multiple projects with variable deadline (short notice, unreasonable timeline, understaffed projects). 4. Approximating project timeline knowing #I/O lists. 5. What is others' vision/ the goal after getting P.Eng? 6. Machine safety in high radiation environment. Not because I don't know any of the above points, I would love to hear different ideas and various perspective from fellows and experts in the field of instrumentation & controls engineer. My background is mechatronics. I spent 1 year before my graduation working on developing and prototyping mechanical design of assistive robot. At the end of my graduation, I realized that mechanical design sin't something I wanted to do for a long term. However, I have had immense interest in industrial automation, process control, and instrumentation. Now I have been working as a control systems specialist for a worldwide cyclotron manufacturer. I have been doing PLC and HMI design using Rockwell Software (Allen-Bradley) for different subsystems since then. The subsystems that I have been working on consist of vacuum process control, deionized water cooling system, helium cooling system, ion source injection system, etc. I have performed several cyclotron commissioning worldwide, the latest commissioning I had was in the middle east. I am currently assigned to program, test, and commission high current solid target station. The technology at my workplace is unique and interesting, however, sometimes I am wondering about the prospect of cyclotron usage for medical purpose and thinking to switch from high technology manufacturing. I want to know the difference of controls engineer in manufacturing and consulting (difference in terms of roles, design freedom, possibilities to play/ test the system, exposure to variety of instrumentation technology).


General/Career Mentee
Civil
Port Moody
Power Equip/Electronics
P.Eng., 1 years
Career Counselling, Entrepreneurship, General Mentoring
I am thinking about making a switch from Project/Construction Management and Quality Management to actual design of transmission lines. All of my past experience has been Project/Construction Management, Quality management or Field Engineering on transmission/distribution line projects, with little design experience. Now that I have strong base in field knowledge I'm just looking to get some career advice on options on how to get my foot in the door as a Junior Transmission line Designer.


Both
Structural
Vancouver
Bridges
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor to help me with my career development as an engineer. My background is in Structural Engineering. I had 4 years experience before I came to Canada in 2016, and have worked for Mott MacDonald in Vancouver since arriving (7 years experience total). In the three years working in Canada, my career development has drastically stopped. I wish to correct this, and I know having a mentor who could help me with my career development / advancement would be a huge benefit to me at the moment and make me feel more confident in my career.


Both
Design/Build
Burnaby
Other
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor to guide me with my Canadian perspective in engineering practice. as I have consolidated academic and work experiences in civil engineering, in addition, I have obtained B.Sc. in Civil/Irrigation engineering in 2010 and M.Sc. in Water Resource Engineering in 2016 at the University of Sulaimani, Sulaymaniyah, Iraq. My M.Sc. thesis evolves studying water resources using high technologies (Remote sensing and GIS). Through my studies in Civil Engineering, I have had the opportunity to gain considerable learning and skill development through a wide range of concept and design to correspond theories in practice as a civil engineer and a designer into different engineering projects. Throughout my diverse working life, I have gained extensive practical experience in many civil engineering fields. Having the ability to support, design, and estimate high-budget engineering projects for provincial and municipal roads, buildings and waterworks, and seeing projects through the planning processes to completion. Possesses the ability to maintain mutually-beneficial relationships with clients and subcontractors. My core designing and project management skills added to my extensive experience working, not only in the civil engineering field but also specifically with academic career, I have been teaching expertise for more than three years and I had three research papers and two academic conferences in civil engineering which qualify me as a very strong civil engineer to apply for this position. Currently, I am working as a civil engineer gaining Canadian engineering practice to introduce and incorporate my previous experience into the Canadian context. I got my E.I.T license recently. My professional civil engineer application is ongoing and I am eligible to get my license. Many thanks for your consideration


Both
Const and Manufact - Other
North Vancouver
Engineering
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor who can guide me through P. Eng registration process and competency experience reporting system. I am a production engineer and had worked in an Aircraft Manufacturing company. Currently working as a production controller at Seaspan- Vancouver Shipyards Co. , where i started off as junior production control technologist for one year and now production controller where I plan materials and work orders to fabricate assemblies. I would like to have someone with experience in production /material planning or industrial engineering


Both
Construction
Vancouver
Construction
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
-As an EGBC Engineer-in-Training (EIT) and recent UBC Mechanical Engineer Masters graduate, I gained technical, estimation & project coordination experience through conducting desktop-based technical analysis, modeling & simulation, conducting mechanical and plumbing take-offs and estimations, preparing, maintaining and reviewing technical documentation, conducting fieldwork, site testing and data collection over the 3 years in technical work and research experiences. Currently, I am working as a Junior Estimator in Nelson's Mechanical Services providing engineering estimations, take-offs, bidding and pricing support for several key residential and commercial construction projects of BC. Currently, I am learning the construction and insulation trade while gaining valuable technical and project experience pertaining to mechanical, electrical and plumbing (MEP) insulation. Previously, I worked as a junior project coordinator for 8 months in two respected consulting firms of Ontario and supported 20 challenging building and environmental consulting projects across North America. I have a strong desire to become a P.Eng with EGBC. Hence, I am actively seeking a short time/long term mentor (P.Eng) who could help me consider my mechanical engineering estimation experiences as engineering experience to become a P.Eng in time. I would like to develop my technical and project management skills in the mechanical (MEP) sector. I would really like to have someone provide a voluntary mentorship at least until I find a P.Eng supervisor. Please review my LinkedIn profile https://www.linkedin.com/in/md-amin-mahmud-masc/ to know more about my education and experiences. I can be reached at 778-681-2348 or amin1448@gmail.com,


Both
Electric and Gas Utilities (incl. BC Hydro)
Langley
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a Mentor that will guide me on what path I should take based on the credentials I have. I lack practical experience which makes it hard for me to apply for an engineering job, but I have recently finished my Bachelor's degree in Electronics Systems Engineering at the University of Regina, Saskatchewan. Prior to this, I acquired a degree in Electronics Communication Engineering in the Philippines. I have obtained certification on Leadership in Energy and Environmental Design (LEED) as a General Associate because I have always been interested in sustainability and renewable energy. I hope that someone in the field of Electronics Engineering can give me guidance and tips about the proper steps that I should make to establish a good start for my career.


General/Career Mentee
Water Resources
Vancouver
EIT
Career Counselling, General Mentoring
As a recent graduate in Civil, I have worked for mostly public sector organizations and have co-op experience in Dam Safety. I am hoping for a mentor in the water resources, municipal engineering or geotechnical engineering field that is able to share insight on the technical day-to-day work done within any one of these industries. However, I am mostly looking for a mentor that does not mind sharing personal examples of how they began their career and the steps they took to get where they are. I also hope to learn how to build and maintain a professional network while balancing personal life and professional goals.


Registration Mentee
Construction
Vancouver
Bldg Construction/Maintenance
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor in the construction project management field that is both experienced and open minded to new ideas. It would be preferable for this mentor to personally hold either a PMP or PEng designation. This mentor should have a passion and understanding for information technology and its profound effects on construction project management in the 21st century. It'd be great for the relationship between my mentor and myself to be mutually beneficial.


General/Career Mentee
Burnaby
Other
P.Eng.
General Mentoring
I am looking for a mentor to guide me in the area of engineering management. I recently joined the management team at the company I work for after 13 years of technical engineering. I find it to be a challenging transition away from the technical into managing. I'm looking for insight from others who have made the move from a technical/project manager into a management position in a company. I've always wanted to be in management and I'm looking to continue furthering my career in this area. I have a mentor within the company I work for but I would like insight from others outside.


Both
Electrical/Electronic
Surrey
Electronics/Microelectronics
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship
I am looking for a Mentor that can guide me in the Electrical Engineering discipline. What has changed in the past couple of years and what is becoming more prominent in this sector? I am currently an Electrical and IT Engineer at Saltworks Technologies Inc. and would love to know more about the high technology industry and the control systems that drive it.


Registration Mentee
Transportation
Burnaby
EIT
Engineers and Geoscientists BC Registration Process, General Mentoring
I am seeking a mentor with extensive experience working in the paving and transportation environment. I would like to learn more about the different career paths within this industry. Also, I would like to learn more about the technicalities of this field. My background is in Civil Engineering and I would like to explore with my mentor different path and realistic goals for my career as an engineer.


Both
Mechanical
Surrey
Machinery
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a Mentor to guide me with engineering practices and culture in Canada. My background is in Mechanical Engineering but I had my undergraduate degree in the Philippines. I hope this fact would not be used to criticize my capability as an engineer. I recently graduated this February of 2019 with a short work experience as a Quality Improvement Intern with Chevron. Furthermore, I have strong skills in leadership, communicating with people and setting expectations from being a Student Chair in ASME Student Section. I would like to have some guidance from someone that can add value to my foundation with a background of field engineer.


Both
Management
Burnaby
Foundations/Soils/Geotechnology
EIT
Career Counselling, General Mentoring
I am looking for a mentor to guide me in design calculations and the use of codes in earthquake engineering. I worked in various projects in steel structures, slope stabilization, and management in ground investigation contract. I worked for Golder & Associates and I worked in couple minor ground investigation projects for City of Coquitlam and City of Burnaby. Currently I am studying for PMP certification, and self learning in earthquake engineering when I am looking for a new job opportunity. I would like to have some guidance in design calculation and career development in geotechnical engineering from a mentor.


General/Career Mentee
Port Moody
P.Eng., 4 years
Career Counselling, General Mentoring
I am looking for a mentor to guide me with the preparation for the exam to obtain the PMP certification. I have over 20 years of construction experience with 10+ years of infrastructure experience in Canada. I have worked across infrastructure projects including projects in water, transportation, oil and gas, mining and power. I worked 7 years with SNC Lavalin in Mining, Thermal, and Infrastructure Divisions from Aug 2008 Doris Gold Mine (Nunavut) to May 2015 Seymour-Capilano Twin tunnels (North Vancouver). Most recently I have been working as a Project Manager / Estimator with a smaller civil contractor in Langley. I hold my P. Eng designation and have a degree in Civil Engineering.


Registration Mentee
Instrumentation/Controls
Surrey
Instrumentation & Controls
Applicant
Engineers and Geoscientists BC Registration Process
I am preferable looking for a mentor, who has completed his education out of Canada and have gone thru this whole procedure to get his P. Eng


Both
Construction
Vancouver
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a mentor for both registration and general career mentorship. I am a recent UBC graduate with a Bachelor of Applied Science in Civil Engineering. Prior to this I completed a Civil Technology diploma and spent several years working in various labour roles in both BC and Alberta. I am currently employed as a project coordinator by a general contractor working in the lower mainland. Regarding registration, I would like mentorship on how and what to report and how to complete the registration process while working in the project management industry. For general career mentorship I would like to learn about career paths in my current field as well as explore what other opportunities are available to someone with my background.


General/Career Mentee
Regional, Municipal
North Vancouver
P.Eng.
Career Counselling, Entrepreneurship
I am looking for an experienced mentor who can tell me more about the unwritten rules in the workplace. I appreciate if I can be prepared for an interview and then have the advice for my challenges in the workplace.


General/Career Mentee
Mechanical
Abbotsford
EIT
Career Counselling
i am looking for a mentor to guide about my career . i have done my master in mechanical engineering in the field of bio diesel. I'm seeking a mentor with extensive experience working in a industrial plant environment. My ideal mentor can coach me technical details on equipment, tools and approaches for maintenance, and long-term career growth and development.


Both
Oil and Gas
Vancouver
Processes/Production
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I have worked as a Utilities Engineer in the LNG Industry in Nigeria recently relocated to Canada. I would like to be a part of the developing LNG Industry in BC either as a regulator or a consultant/engineer in one of the LNG facilities. I am looking for a mentor who would aid my integration into engineering practice in BC and help me to navigate a successful career.


Both
Environment
Kelowna
GIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am currently seeking a mentor who can actively support my progress as a geoscientist. Ideally they would provide insights to the application process and clarity to obstacles that I encounter as I gain experience in the field and office. Beyond practical knowledge, the mentor can provide tips and tricks to maintaining a healthy work-life balance, navigating the soft skills of career development (ie, wage negotiation, etc.), and planning for future changes and growth.


Both
Water Supply
Vancouver
Facilities,Maint.,Operations
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a mentor that can advise me, give tips, give me confidence and hopefully introduce me into his/her network! It would be great if its a learning journey for the both of us, where we are honest and helpful to each other. I would like to get mentor ship on being a more complete environmental/process engineer, preferably in the water treatment world. Short summary: I am Menno Wokke, 24 years old and a water treatment process engineer. I have a Bachelor degree in Water Management at the HZ University of Applied Science and my profession is Process Engineer. I worked for 2 years and 4 months at PWNT (drinking water treatment technology company) in the Netherlands for the research and process departments. Relevant courses of my Bachelor Degree: Water Treatment, Fluid Dynamics, Urban & Rural water management, Aquatic Ecology, Environmental Chemistry, Water System Analysis.


Both
Design/Build
Squamish
Building Systems
EIT
Career Counselling
Seeking a mentor working in project management with a diverse background of work experience or mechanical engineering. I would appreciate discussing with a mentor involved either in non-profit, manufacturing, environmental engineering or building performance. A mentor with knowledge of LEED and WELL building standards, working in energy efficiency/optimization of buildings or systems design, or versed in an industry applying fluid dynamics calculations.


Registration Mentee
Communication & Telecommunication
Kelowna
Applicant
Engineers and Geoscientists BC Registration Process, General Mentoring
I am new to Canada, and I am looking for guidance related to Engineering regulations, law, management, economics, society, sustainability and environment, and BC's engineering landscape (industry, major events, challenges, policies, etc.).


Both
Civil
Vancouver
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am an E.I.T with EGBC. I am currently an Environmental EIT with SNC-LAVALIN, focusing on municipal drainage design and stormwater management. I received my MSc. degree from the University of Alberta recently. I also had a bachelor's degree in Environmental Engineering at the Xi'an Technological University in China. Besides three years of research and field experience in the optimization of water treatment processes, I had over three years of experience with analytical labs in Edmonton, including Imperial Oil and Idexx Laboratories. I am looking for a mentor in BC and can guide me through the registration process and to help me improve the essential technical skills that required for a P.Eng in Civil and Environmental engineering.


Registration Mentee
Electric and Gas Utilities (incl. BC Hydro)
Burnaby
Power Generation/Distribution
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a Mentor to guide me on power generation and distribution systems. My background is in Electrical Engineering, specializing in power systems. I am employed at Cullen Diesel Power. I started as a junior technical generator sales engineer and within a few months started managing my own projects. I would like to have some guidance from someone with a background and experience in power generation or distribution systems.


Both
Building Science
Vancouver
Building Enclosure Assessment & Design
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
My background is in Sustainability Engineering, I have project experience in various aspects of the energy industry, including oil & gas resource assessment, energy efficiency & management, asset integrity management. I would like to use the skills garnered from my education & professional experience in the completion of sustainable projects (focus:people/planet/profit) in the green building & infrastructure sector. I'm looking for a mentor with similar drive to improve the way we develop as a society.


Both
Structural
Surrey
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am looking for a mentor who has experience in Structural Designing of buildings using BC Building Codes. This way he/she can help me co-relating my international experience with BC environment and hence will act as a catalyst for my Competency Report submission process.


Both
Civil
Surrey
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a mentor who is working in the civil engineering field with a speciality in municipal or urban planning. I would prefer someone who recently became a P.Eng or is a senior EIT so that I can learn more from their experience.


Both
Management
Vancouver
Quality Management
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor with experience in Engineering Management (Industrial Engineering), or with experience in health care. I currently serve as a Program Advisor of the Physician-led Quality Improvement initiative, where I coach physicians in quality improvement tools and techniques, including Lean Six Sigma and Statistical Process Control. I wish to find a mentor who has experience in the health care sector, or in quality improvement/management.


Both
Mining
Victoria
Machinery
P.Eng.
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I would like to work with someone who has experience is Asset Management, Reliability Engineering and/or mining. I work at a diamond in the NWT on a 2 weeks on and 2 weeks off rotation. At work my I am under the supervision of a Mechanical Engineering PEng, however he is very hands off. He will support me in my major projects to complete my competencies, but his focus is more on management instead of helping me grow technically. Currently in my role my ability to form relationships with people is why I am excelling, but I am technically weak. Rio Tinto (RT) has some education that I am learning about my role from, however I wish to gain additional guidance through the mentoring program. RT has also provided me with an external career coach to help work with me on soft skills. I am enrolled in the Graduate Training Program at RT.


Both
Communication & Telecommunication
Vancouver
Telecommunications
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
Newcomer looking for a mentor in Wireless, Telecom, Electronics and IT: I am new to Canada and Vancouver (originally from Finland), and I'm looking for a mentor that could provide me with advice, insight and recommendations that would help me "get up to speed" with the local tech industry, build and cultivate effective professional networks, and plan for a successful career in the Canadian workforce. I have a Master's Degree and several years of work in wireless, electronics, software development and IP networking.


General/Career Mentee
Regional, Municipal
Vancouver
Alternative Energy Systems
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for someone who could guide me to resources relevant to their industry so I can have broader knowledge of the engineering field. I work in electrical consulting and often need to liaise with other industries, for example the government, for projects. It would be helpful to have some general knowledge of the mentor's field so when I need to converse with someone from their field, I can sustain an informative conversation and in turn, represent my company well.


General/Career Mentee
Civil
Surrey
EIT
Career Counselling
I am looking for a mentor who could evaluate my skills, education, and experience and guide me to the proper path of engineering. I am a recent UBC Master's graduate in civil engineering majored in geotechnical applications. A mentor could help me find out what is lacking in me to get hired by a civil/geotechnical company and advice me to improve on those. I am also looking for a mentor who could help me build up a strong connection inside industry personnel. In conclusion, I am looking for a mentor who would help to set foot on the first step of my career.


Both
Geotechnics
Kelowna
Terrain Analysis
GIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
In my mentor I am hoping to find a dedicated professional, who believes their work makes an impact on peoples lives. A motivated individual with experience in geotechnical work, who demonstrates their dedication to their practice would be perfect. My ideal mentor would give advice to help me to produce high quality reports, be efficient in the office/field, and general career advice. A responsive mentor is necessary, as I do not wish to have communication issues with my mentor.


Both
Construction
North Vancouver
Applicant
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship
I'm seeking a mentor with extensive experience owning a construction or renovation company in residential or commercial field. I'd like to learn more about costs, equipment, material; as well as budgeting and monitoring software. I'd like to talk about career growth . My ideal mentor can coach me in technical details on establishing the company and long-term career growth and development. My background is Civil and Geotechnical Engineering and I'd like to better understand where these paths meet and point to. As a civil engineer with more than 10 years of relevant experience in construction industry I want to gain some information about the rules and regulations in construction industry in Canada and I am looking for a Mentor to show me the ropes about how to enter to my professional job market in Canada.


Registration Mentee
Mechanical
North Vancouver
HVAC
Applicant
Engineers and Geoscientists BC Registration Process
I need to be guided through the assessment tool in order to set it up as best as I can. I would need mentor's help to have his/her input in shaping my professional profile in the right format.


General/Career Mentee
Power (Energy)
Vancouver
Power Generation/Distribution
Applicant
Career Counselling, General Mentoring
I have more than 14 years of experience in electrical engineering in oil & gas and industrial projects and need a mentor to help me in identifying and covering required training and knowledge update for transferring my experience from outside Canada to BC engineering market, particularly on power system study software utilized in BC. Please kindly be informed that I have worked with ETAP, EDSA, NEPLAN and DigSilent software.


General/Career Mentee
Electric and Gas Utilities (incl. BC Hydro)
Coquitlam
P.Eng., 2 years
Career Counselling
I am looking for a Mentor to guide me with the job search and application process for the crown corporation organizations. I am working with Simson Maxwell as a Mechanical Design Engineer for the last three years. I started my career with Siemens Ltd. as a Project Engineer and worked for 5 years. I would like to have some guidance from someone with a background and experience Crown Corporation Projects.


Both
Instrumentation/Controls
Burnaby
EIT
Engineers and Geoscientists BC Registration Process
I am looking for a mentor that is an expert in the industrial control field such as PLC, SCADA, HMI, or any other controller technology to better understand what care these systems require. In addition, I would like to learn more about robotics, embedded systems and CNC. My ideal mentor could coach me in technical details on equipment, tools and approaches for maintenance, and long-term career growth and development. My background is in Automation and Control Engineering, and I would like to better understand where these paths meet and point to.


Both
Design/Build
Abbotsford
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a mentor who demonstrates positive attitude and acts as a positive role model. Having completed my Masters in civil engineering and having a year experience in both railway industry and General Contracting I would like to have a mentor who would provide me guidance and constructive feedback by identifying my strengths and weakness and teaching how to use them to make themselves successful in the field.


General/Career Mentee
Project Management
White Rock
Pipelines
EIT
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor with experience in Oil & Gas, Pipelines, and facility development. I graduated as a chemical engineer with the co-op program at the University of Alberta with 24 months internship experience with Imperial Oil, CNRL, and syncrude. Upon graduation in 2013, I worked with Schlumberger in Canada and the US until 2015. Since then, I have not been successful in finding gainful employment as an engineer (EIT) until recently being hired by Solaris as a Project Engineer. With a lot of lost time, I am eager to find a mentor that understands the industry that Solaris works in so that I can accelerate my career.


Both
Burnaby
GIT
Engineers and Geoscientists BC Registration Process, General Mentoring
I'm seeking a mentor with extensive experience working in geological environment. My ideal mentor can coach me in technical details on approaches for exploration, and long-term career growth and development. My background is Environmental Chemistry and Seismology, and I'd like to better understand where these path meet and point to.


Both
Oil and Gas
Vancouver
Machine,Plant Design
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I'm seeking a mentor with extensive experience working in Reliability in a industrial plant environment. I'd like to learn more about machines: pumps, compressors, vessels; as well as instruments and control systems, to better understand what care these systems require. I'd like to talk about wide scale maintenance programs and improvements. My ideal mentor can coach me in technical details on equipment, tools and approaches for maintenance, and long-term career growth and development. My background is Chemical Engineering and Reliability, and I'd like to better understand where these paths meet and point to.


Both
Structural
Vancouver
Commercial
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling
I am a recent graduate from UBC Structural Engineering program. I am looking for an experienced Mentor to guide me through my career switch: my current job is on the academic/research side and would like to seek an opportunity in the practical consulting industry. I was trying to explore by myself for the past six months but didn't get any breakthrough. I would like to have some guidance on how should I improve myself to better fit in the job markets. Your help is highly appreciated.


Both
Vancouver
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a Mentor to guide me through the P.Eng. registration process and offer insights on career development. It has been about a year I am working as "asset management planning analyst" in BC and would love to register as a P.Eng. I hold a master's degree in civil engineering (specialized in transportation engineering) and a bachelor's science in civil engineering.


General/Career Mentee
Mining
Vancouver
Materials Handling
P.Eng., 1 years
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor to guide me with my career development and job search in BC. My background is mechanical engineering, and I am a licensed P.Eng with over 12 years of experience as a project engineer in surface and underground mining projects. I worked over 7 years in Alberta in several Oilsands projects. I am a M.Sc in mechanical engineering in Germany and was trained in industrial environmental management systems. I have offered leadership to project teams in Europe and the Americas during the design, procurement, construction, commissioning, and start-up with special regard for safety.


General/Career Mentee
Research and Development
Vancouver
Electronics/Microelectronics
EIT
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor who has a strong interest in the environment and sustainability, but who ideally also has a background in either electronics or engineering physics (or something related). I haven't spent much time working in the construction/consulting sector, so would prefer a mentor working in the high tech industry (or related) over construction/consulting. I would prefer a female mentor so that I can discuss and hopefully get advice on how to handle a variety of situations that have made me uncomfortable or reconsider my career choice.


Both
Forestry
Castlegar
Geomorphologist
GIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
A PGeo. or PEng. in the natural resource industry that can provide guidance, advice and networking to assist me in finding supervision acceptable to EGBC.


General/Career Mentee
Geological
Vancouver
EIT, 1.5 years
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a Mentor in Consulting Engineering to guide me through my early working years as I make decisions that will influence the direction of my career path. My background is in Geological Engineering, I work for a mining consulting company in Vancouver. I have been working for 1.5 years since my graduation in April 2017. I am seeking guidance from someone who is about mid-way through their career and can give me advice regarding decisions that I should make/things I should think about in my early working years.


General/Career Mentee
Chemical
Coquitlam
Process Design and Control
P.Eng., 2 years
Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring
I am looking for a mentor to guide me through long term career planning in the future industry of chemical process, oil&gas, alternative fuel and LNG. I have a bachelor's degree in chemical engineering at University of Waterloo, ON. I have attained my P.Eng license two years ago. Currently, I am working at Intertek Testing Services as a gas safety inspection program manager. My duties and responsbilities are overseeing the gas safety inspection work on commercial/industrial gas fired appliance in Western Canada and Prairie provinces. With climate action initiatives around the world and especially here in BC as a pioneering leader, the chemical processing and resource exploitation industry shift is occurring and I believe will continue to be reformed. I would like to get some feedback on my career planning in this dynamic environment as I am in the crucial stage of making important career transition.


Both
Environmental
Vancouver
Audits/Site Remediation
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
As a millennial engineer-in-training with an career emphasis in project management, i wish to better understand how modern workplace dynamics, involving cross-generational employees, play a role in the success of companies. My ideal mentor would be someone who has experience and success working/managing a company with employees at varying age groups, someone who understands the challenges that these age groups face in the workplace, and someone who is able to provide advice or insight related to challenges encountered in the modern workplace.


General/Career Mentee
Structural
Qualicum Beach
P.Eng., 7 years
Career Counselling, Entrepreneurship, General Mentoring
I practice as a independent consulting engineer in construction business and I am looking for a mentor to consult with regarding some technical questions I might have as well as possibly mentor me when it comes to business practice. I was previously employed in steel industrial sector, but I just started practicing as an independent consulting engineer in residential and small commercial field, mostly working with wood and concrete design.


Registration Mentee
Construction
Surrey
EIT
Career Counselling, General Mentoring
I am new Immigrant in Canada and looking for a mentor for career counseling who can give me direction to start career in civil engineering field, guide me that where should I focus structure design/Planning/Land Development or Project Management and help developing specific set of skills that will help me start my career.


Registration Mentee
Design/Build
Langley
EIT
Engineers and Geoscientists BC Registration Process
I am looking to receive mentorship from a professional engineer to help my technical design strategy while working towards my own professional designation. I currently work in the automotive field designing aftermarket vehicle components and have been doing so for the past 4 years. My projects range from suspension components, turbo-machinery, fuel pumps, cast exhaust manifolds, or anything related to light duty vehicles. A number of projects are macro-managed where I believe I could benefit from a mentor.


General/Career Mentee
High Technology Manufacturing
Burnaby
Instrumentation/Equipment
EIT
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a mentor to support my interest in alternative energy solutions and the energy engineering sector. I am a British Masters graduate in Mechanical and Energy Engineering new to Canada. I have gained a job as a Production Technologist for Mercedes-Benz Fuel Cell Division but strongly intend to advance to an EIT position in a fuel cell company and would like guidance how to do so as quickly as possible. I am also interested in a part-time phD on alternative energy/fuel cell technology, as a means of enhancing my industrial work and developing on my thesis from university.


Both
Transportation
Vancouver
Transportation
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship, General Mentoring
I am looking for a guide to help me gain some professional experience and get more exposure to the transportation industry in BC. I recently graduated from my MASc degree at UBC and I am looking to apply my knowledge in the industry. I am striving to make a change in the community and excited for an opportunity to do so. I hope to build a better understanding of the transportation industry and the different fields within transportation. I am looking for a mentor to guide me to kick start and focus my career in transportation.


Both
Civil
100 Mile House
Roads,Rails,Airports
EIT
Career Counselling
I am looking for a Mentor to guide me with design calculations and general engineering design/systems integration tips. My background is in Civil Engineering. I was employed in the infrastructure sector. I have worked as co-op student in my master program. I am still looking for full time job as project engineer or project coordinator. I would like to have some guidance from someone with a background and experience in heavy construction.


Both
Electric and Gas Utilities (incl. BC Hydro)
Mission
Water Resources
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Retirement and Succession Planning, General Mentoring
I’m looking for a mentor to provide guidance on the EGBC registration process, career counselling and general mentoring regarding the engineering industry in BC. I studied civil (infrastructure) engineering at Dalhousie University in Halifax, NS. Through my program, I completed four co-op terms. My first three work terms were in the position of Civil Facilities Project Manager at the Halifax Shipyard. My final work term was at Emera (power generation utility) in the position of Junior Construction Project Manager. After graduating last May, I moved to the Fraser Valley and began working at PNR Railworks as a Project Engineer. I’m looking for a mentor with a background in civil engineering that can help me get on track with the EGBC registration process, and provide career guidance as I’m looking to move away from construction project management and head in a different direction.


Both
Construction
North Vancouver
Applicant, 18 years
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship
I am looking for a mentor who help me to get ready to start as a construction manager or superintendent at a concrete mid or high rise position. When accompanying me at his/her job site and tell me my probable weak points, points to grow in this field and having practical informations in this career, which I have been working at for more than 15 years in my first country, Iran.


Registration Mentee
Mining
Richmond
Design Installations
Applicant
Engineers and Geoscientists BC Registration Process
I'm looking for a mentor to guide me through my competency experience report writing. I find that's the struggling part for me especially English writing. I'm sure I have enough experience and just need that help.


Registration Mentee
Design/Build
Richmond
Other
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am a Mech graduate and I am working as a CAD designer in the vehicles outfitting industry. My company has no other engineers and I am looking for some guidance on designing van equipment products such as ladder racks, cabinets & safety partitions. I would also like to ask about dynamic loading analysis/simulations, pneumatics system and plastics design.


Both
Electric and Gas Utilities (incl. BC Hydro)
Surrey
Power Generation/Distribution
EIT, 0.8 years
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
Looking for guidance towards obtaining the P.Eng Designation and guidance for project management and career development.


General/Career Mentee
Construction
Burnaby
HVAC
EIT
Career Counselling, Entrepreneurship, Retirement and Succession Planning, General Mentoring


Both
Heavy Manufacturing
Vancouver
Pipelines
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, Entrepreneurship
I am looking for a Mentor to guide me with professional development. My background is Mechanical/Industrial Engineering. I am currently employed in the Manufacturing industry and had previously worked in Production/Processing facilities. I would like to have some guidance from someone with a background and experience in Mechanical/Industrial Engineering.


Registration Mentee
Mining
Tumbler Ridge
EIT
Engineers and Geoscientists BC Registration Process, General Mentoring
I am looking for a Mentor who can share experience and provide me with guidance in the registration process, particularly the competency assessment part. I already have five validators. I studied a BSc. in Chemical Engineering in South America. Then I came to Canada to pursue graduate studies in Mining Engineering at UBC. Currently, I am working in northern B.C. in a coal mine as Environmental Technician; and I want to become an Environmental Engineer.


General/Career Mentee
Construction
Kelowna
Bldg Design/Const - Wood
P.Eng., 4 years
Career Counselling, Entrepreneurship, General Mentoring
I am looking for a Mentor to guide me with design calculations and inspection of simple structural components including retaining walls all the way up to mid sized residential and commercial buildings. My background in in Civil Engineering. I was employed in MB within the heavy civil sector as a project manager and have worked as a project manager in municipal construction in AB and now BC. I would like to have some guidance from someone with a background and experience in design of small residential/commercial projects including retaining walls and simple shop designs.


Both
Construction
Vancouver
Bldg Construction/Maintenance
EIT
Engineers and Geoscientists BC Registration Process, Career Counselling, General Mentoring
I am looking for a Mentor to guide me with my career development. I graduated with masters degree in Mechanical Engineering and my project during my masters involved constructing form work and Rammed Earth wall and some samples to determine their stability over the period of 2 years and I have solid understanding in using non-destructive and destructive methods to monitor the health of construction and insulation. Also, I have taken online courses on basics of S-frame for structural analysis and would like to develop the knowledge on structural analysis and construction design interpretation and guidance to channel my career in Construction Industry as a Field Engineer


Both
Electrical/Electronic
Richmond